Allied Safety Equipments Private Limited
Thane, Maharashtra
GST No. 27AAGCA2690H1ZM
TrustSEAL Verified
Call 08046079936 85% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand: | PETZL |
| Model Number: | G063AA00 |
| Material(s): | aluminum |
| Certification(s): | CE, NFPA 2500 General Use |
Rigging plate
For organizing the belay and creating a system with multiple anchors. Useful in aid climbing and for setting up Tyrolean traverses.
Description:
Specifications:
| References | G063AA00 |
|---|
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand: | PETZL |
| Model Number: | P36BA |
| Material(s): | steel |
| Certification(s): | EN 959 |
Standard steel anchor for interior use or non-permanent installations.
The COEUR BOLT STEEL is a standard steel anchor made up of a COEUR STEEL hanger, a bolt, and a nut. It is designed for interior use or non-permanent installations. It is available in 10 and 12 mm diameters.
Description:
Economical choice for low-corrosion environments
Assembly composed of a COEUR STEEL hanger, a bolt, and a nut
Easy to clip:
- the wide, ergonomic connection point facilitates carabiner clipping
- the width of the attachment point allows installation of two carabiners at the same time
Reduces wear on connectors: the thickness of the hanger and the rounded edges of the connection point minimize wear on connectors
Hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use
Available in two bolt sizes (10 or 12 mm)
COEUR STEEL hangers, available separately:
- for 10 mm diameter bolt (P36AA 10)
- for 12 mm diameter bolt (P36AA 12)
Specifications:
| References | P36BA 10 | P36BA 12 |
|---|---|---|
| Diameter | 10 mm | 12 mm |
| Weight | 110 g | 135 g |
| Drilling diameter | 10 mm | 12 mm |
| Total bolt length | 85 mm | 105 mm |
| Shear strength in 50 MPa concrete | 23 kN | 25 kN |
| Pull-out strength in concrete 50 MPa | 15 kN | 18 kN |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand: | PETZL |
| Model Number Small Size:: | C04620 |
| Model Number Large Size:: | C04630 |
| Material(s): | aluminum |
| Certification(s): | CE, UKCA |
The RING connection ring can be used to create multiple anchors or be installed directly onto the SEQUOIA and SEQUOIA SRT harnesses' attachment bridges to improve the arborist's lateral mobility.
Description:| References | C04620 | C04630 |
|---|---|---|
| Size | S | L |
| Weight | 40 g | 70 g |
Additional Information:
Product Details:
| Minimum Order Quantity | 10 Piece |
| Brand: | PETZL |
| Model Number: | G100AA00 |
| Material(s): | forged stainless steel |
| Certification(s): | EN 959 |
| References | G100AA00 |
|---|---|
| Diameter | 10 mm |
| Weight | 95 g |
| Granite, gneiss higher than 80 MPa: preliminary testing recommended | |
| Hard limestone higher than 80 MPa: preliminary testing recommended Limestone and medium sandstone 80 MPa to 45 MPa: preliminary testing recommended | |
| Soft rock (soft sandstone, limestone) lower than 45 MPa: preliminary testing required | |
| Very high quality concrete (civil engineering structure) higher than 50 MPa: preliminary testing recommended | |
| Medium quality concrete from 25 to 50 MPa: preliminary testing recommended | |
| Length | 7 cm |
| Drilling depth | 7-7,5 cm |
| Drilling diameter | 12 mm |
| Type of installation | G101AA00 glue (or other glues approved by Petzl) |
| Suggested drying time | 40 min - 10 h |
| Shear strength in 50 MPa concrete | 25 kN |
| Pull-out strength in concrete 50 MPa | 15 kN |
| Times are given for G101AA00 glue (times may vary depending on the glue used and on the external environment |
Additional Information:
Product Details:
| Minimum Order Quantity | 10 Piece |
| Anchor Type | Delta Anchor |
| Brand: | PETZL |
| Model Number: | G102AA00 |
| Material(s): | forged stainless steel |
| Certification(s): | EN 959 |
| References | G102AA00 |
|---|---|
| Diameter | 14 mm |
| Weight | 250 g |
| Granite, gneiss higher than 80 MPa: preliminary testing recommended | |
| Hard limestone higher than 80 MPa: preliminary testing recommended Limestone and medium sandstone 80 MPa to 45 MPa: preliminary testing recommended | |
| Soft rock (soft sandstone, limestone) lower than 45 MPa: preliminary testing recommended | |
| Very high quality concrete (civil engineering structure) higher than 50 MPa: preliminary testing recommended | |
| Medium quality concrete from 25 to 50 MPa: preliminary testing recommended | |
| Length | 10 cm |
| Drilling depth | 10-10,5 cm |
| Drilling diameter | 16 mm |
| Type of installation | G103AA00 glue (or other glues approved by Petzl) |
| Suggested drying time | 40 min - 10 h |
| Shear strength in 50 MPa concrete | 25 kN |
| Pull-out strength in concrete 50 MPa | 15 kN |
| Times are given for G103AA00 glue (times may vary depending on the glue used and on the external environment) |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand: | PETZL |
| Model Number: | P18 |
| Material(s): | Aluminum |
| Certification(s): | CE EN 362 type Q, GB/T 23469-Q |
| References | P18 |
|---|---|
| Color(s) | gray |
| Weight | 55 g |
| Major axis strength | 25 kN |
| Minor axis strength | 10 kN |
| Gate opening | 10 mm |
Additional Information: