Fall Arrest And Work Positioning Harness

Product Details:

Lightweight and comfortable seat harness for suspended rescue.FALCON is a lightweight seat harness designed for rescue operations involving suspension. Metal ventral attachment point distributes the load between the waistbelt and leg loops. The design is lightweight and comfortable, joining the slim, semi-rigid waistbelt and leg loops with 3D foam padding, which provides an optimal balance between low weight and comfort, as well as reduced bulk for use while standing, moving, or hanging. The DOUBLEBACK PLUS self-locking buckles on the waistbelt and the FAST LT buckles on the leg loops allow for easy and quick donning and adjustment. The rear buckle allows a TOP or TOP CROLL L chest harness to be attached.
Description:Especially suited for rescue operations that require suspension:- Ventral attachment point distributes the load between the waistbelt and the leg loops when hanging
Lightweight and comfortable:- Semi-rigid, slim waistbelt and leg loops with 3D foam padding, providing optimal comfort/weight ratio and reduced bulk- Textile side attachment points, for occasional use, limit bulk and weight
Ergonomic:- Waistbelt equipped with self-locking DOUBLEBACK PLUS buckles for quick and easy adjustment- Leg loops equipped with FAST LT buckles to facilitate donning and removing the harness- Possible to convert lateral textile attachment points to metal attachment points using the RING2SIDE accessory- The rear metal buckle allows a TOP or TOP CROLL L chest harness to be attached- Five equipment loops: two large rigid ones in front for easy access to gear, three small flexible ones in back that will not interfere with wearing a backpack- Two slots for CARITOOL tool holder
Specifications:

• Material(s): Nylon, polyester, aluminum
• Ventral attachment point: Yes
• Lateral attachment points: Yes
• Rear attachment point on the waistbelt: Yes
• Certification(s): CE EN 813, CE EN 358, EAC, ASTM F1772, XF 494: FZL-DD-I, GB 6095/W, GB 6095/Q

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Ultra-lightweight and comfortable sit harness for rescue operations that involve climbing techniquesFALCON MOUNTAIN is an ultra-lightweight sit harness designed for rescue operations that involve climbing techniques. Its ventral attachment point has a textile bridge for mobility when progressing and comfort when walking. The design is very lightweight and comfortable, joining the slim, semi-rigid waistbelt and leg loops with 3D foam padding, which provides an optimal balance between low weight and comfort, as well as reduced bulk. The DOUBLEBACK self-locking buckles on the waistbelt and leg loops make it quick and easy to put on and adjust. The rear plastic buckle allows a TOP or TOP CROLL L chest harness to be attached.

Description:Especially suited for rescue operations that involve climbing techniques:- Ventral attachment point with textile bridge favors progression with climbing techniques and makes for comfortable walking
Ultra-lightweight and comfortable:- Semi-rigid, slim waistbelt and leg loops with 3D foam padding, providing optimal comfort-to-weight ratio and reduced bulk- Waistbelt is slimmer at the hip for greater comfort and ease during approaches or when working on the ground- Textile side attachment points, for occasional use, limit bulk and weight
Ergonomic:- Waistbelt and leg loops equipped with small self-locking DOUBLEBACK buckles for quick and easy adjustment- Possible to install the RING2RING accessory on the ventral attachment point for better equipment organization (lanyard(s), descender, rope clamp, chest harness, or other equipment)- Rear plastic buckle allows a TOP or TOP CROLL L chest harness to be attached- Four equipment loops: two large rigid ones in front for easy access to gear, and two small flexible ones in back that will not interfere with wearing a backpack- Two slots for CARITOOL tool holder
Specifications:

• Material(s): Nylon, polyester, aluminum
• Ventral attachment point: Yes
• Lateral attachment points: Yes
• Rear attachment point on the waistbelt: Yes
• Certification(s): CE EN 813, CE EN 358, CE EN 12277 type C, EAC, ASTM F1772, XF494: FZL-DD-I

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Petzl basic Rope Access kit :Petzl Parallel Rope 10.5mm 50m : 2 CoilsPetzl Asap' Sorber Lanyard 40 cm : 1 NoPetzl Avao Harness : 1 NoPetzl Asap Fall Arrester Device : 1 NoPetzl Ok Triact-Lock Carabiner : 2 NosPetzl Am'd Triact-Lock Carabiner : 1 NoPetzl ID's Descender : 1 NoPetzl Ascension Ascender Left : 1 NoPetzl Allied Kit Bag : 1 No Can use for Glass Cleaning

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Rope Access Kit Petzl & Climax 

• Petzl Parallel Rope 50 Mtr : 2 Coils
• Climax Energy Absrober : 1 No
• Climax Harness Atlas Plus : 1 No
• Climax Otto : 1 No
• Petzl Rig Descender : 1 No
• Petzl Anneau Sling 150 cm Red : 2 Nos
• Climax Connector 30 : 5 Nos

Can be used for Glass Cleaning and Painting

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Fall arrest harness.
NEWTON is a lightweight, ergonomic fall-arrest harness. The harness is easy to use; its straps are color-coded to simplify donning. It allows immediate access to tools, thanks to its equipment loops and slots for the TOOLBAG pouch. Its textile sternal attachment point and metal dorsal attachment point provide great versatility. It is certified to European and Russian standards.

Description:

Simple, lightweight design:
- anatomical design is close-fitting yet allows optimal freedom of movement
- textile sternal attachment point, lightweight and abrasion resistant
- anodized aluminum dorsal attachment point for great durability
- allows installation of a LIFT spreader for descending in an upright position

Simple and easy to use:
- color-coded straps (yellow/black) provide rapid identification of the upper and lower parts of the harness before donning
- FAST LT PLUS sternal automatic buckle allows the harness to be fastened and unfastened quickly and easily, without loss of adjustment, even with gloves. The buckle’s unlocking system limits the risk of accidental unfastening
- shoulder straps and leg loops equipped with self-locking DOUBLEBACK buckles for quick and easy adjustment
- two equipment loops and two slots for TOOLBAG tool pouch, for easy tool access

Specifications:

• Sternal attachment point: fall arrest system attachment
• Metal dorsal attachment point: for attaching a fall arrest system
• Certification(s): CE EN 361, EAC, UKCA, JSFAD
• Material(s): nylon, polyester, aluminum

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Tree care seat harness for doubled-rope ascent techniques.
The SEQUOIA® is a tree care seat harness for doubled-rope ascent techniques. The extra-wide, semi-rigid waistbelt and leg loops provide comfort for the arborist. The waistbelt is equipped with a FAST buckle for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves. The leg loops have FAST LT PLUS buckles. The gated attachment points allow the user to easily connect a ZILLON or MICROFLIP lanyard, or to install several attachment bridges and accessories directly on the bridge. The harness also makes it easy to carry and organize work tools, with multiple equipment loops and slots for attaching CARITOOL tool holders.

Description:
Built for comfort:
- Semi-rigid, wide waistbelt and leg loops for excellent positioning; sculpted and lined with foam padding for comfort during suspension
- Two gated attachment points allow the user to easily connect a ZILLON or MICROFLIP lanyard, or to install several attachment bridges (fixed or adjustable) and accessories directly on the bridge (RING, SWIVEL)
- Attachment bridge provides lateral mobility
- Mobile side attachment points allow the user to follow the orientation of the lanyard during lateral movement

Easy to adjust:
- Waistbelt equipped with a FAST buckle for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves
- Leg loops equipped with FAST LT PLUS buckles with a locking system that limits the risk of it involuntarily unfastening
- DOUBLEBACK buckles for adjusting the height of the attachment bridge and allowing the arborist to position him/herself comfortably; the buckles have a plastic cover to help keep them locked

Easy to carry and organize tools:
- Nine pre-shaped equipment loops with protective sheath
- Five slots for CARITOOL tool holder
- Two retainers for a carabiner to hold a chainsaw or handsaw
- Elastic band for attaching a first aid kit

Seat may be attached to improve comfort during prolonged suspension

Specifications:

• Attachment points: Attachment bridge, gated attachment points, side attachment points
• Certification(s): CE EN 358, CE EN 813, UKCA, EAC, GB 6095-2021: W.
• Material(s): Nylon, polyester, polyethylene, aluminum, steel

 

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Ultra-comfortable harness for rope access
The ASTRO harness is designed for rope access technicians. Its design is specific to progression and rope ascent. The 3D foam padding and semi-rigid waistbelt and leg loop construction provide comfort throughout the workday. The gated ventral attachment point allows the user to efficiently install the necessary equipment for progression. The integrated CROLL L rope clamp improves efficiency for rope ascent. The waistbelt features metal side attachment points, equipment loops, and tool holder slots, allowing the user to organize and carry all the necessary equipment for a day of work. DOUBLEBACK PLUS self-locking buckles and FAST opening buckles make donning and adjusting the harness simple and convenient, even while wearing gloves.

Description:
Ultra-comfortable construction:
- Widely spaced shoulder straps reduce neck chafing
- Thin, sliding straps provide more freedom and ease of movement
- All contact zones, including the shoulder straps, waistbelt and leg loops, use 3D foam padding and are lined with breathable material, providing more comfort while suspended and throughout the workday
- Semi-rigid waistbelt and leg loops provide optimal harness fit and support
- Metal side attachment points can be folded down to prevent them snagging accidentally when not in use
- Elastic leg loop bands (replaceable and available as an accessory) allow the harness to maintain the right adjustment whether the user is walking or suspended
- Aluminum dorsal ring on shoulder / waistbelt connection strap

Efficiently integrate equipment with gated ventral point:
- Connect the PROGRESS ADJUST or JANE lanyard directly to the pin of the attachment point without a connector
- The CROLL L ventral rope clamp is connected directly to the ventral point for greater efficiency and freedom of movement on rope ascents
- Connect a PODIUM or LITEPOD work seat to the pin of the attachment point so the load is supported directly by the descender, while providing mobility at the ventral attachment point

Convenient adjustment system:
- Shoulder straps have a FAST opening buckle on the left, making it easy to put on and take off; and a DOUBLEBACK self-locking buckle on the right with an anti-slip device, for easy adjustments that don't slip
- Waistbelt is equipped with DOUBLEBACK PLUS self-locking buckles and anti-slip devices can be inserted (included, but not installed)
- DOUBLEBACK PLUS self-locking buckles are made of anodized aluminum and remain easy to adjust throughout the lifespan of the harness
- Leg loops are equipped with FAST opening buckles that fasten and unfasten quickly and easily, even while wearing gloves, without needing to readjust

Easy to carry and organize equipment:
- Shoulder straps are equipped with a Velcro strap that can be adjusted up or down and positioned on the left or right side to hold an ASAP'SORBER energy absorber
- Lanyard connector parking can be added on the shoulders for fall-arrest lanyards (available as an accessory)
- Waistbelt is equipped with two foldable, side metal attachment points for connecting a positioning lanyard in double mode

Specifications:

• Ventral attachment point: Attachment for a descender, a progression or positioning lanyard in single mode, or a work seat
• Lateral attachment points: Attachment for a positioning lanyard for use in double mode
• Sternal attachment point: Attachment for a fall-arrest system
• Dorsal attachment point: Attachment for a fall-arrest system
• Rear attachment point on the waistbelt: Attachment for a restraint lanyard
• Certification(s): CE EN 361, EN 813, EN 358, EN 12841 type B
• Material(s): Nylon, polyester, aluminum, steel
• Size: 0,1,2

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Comfortable and versatile harness for work at height.
The AVAO harness is specifically designed for workers at height. Its design is specific to work positioning and rope descent. Contoured foam on the semi-rigid waistbelt and leg loops provide comfort during use. The waistbelt features metal side attachment points, equipment loops, and tool holder slots, allowing the user to organize all the necessary equipment for a day of work. Adjustment is quick and easy with self-locking DOUBLEBACK buckles.

Description:

Comfortable construction:- Widely spaced shoulder straps reduce neck chafing- Thin, sliding straps provide more freedom and ease of movement- All contact zones use contoured foam and are lined with breathable material, including the shoulder straps, waistbelt and leg loops, making it more comfortable to work and move around- Semi-rigid waistbelt and leg loops provide optimal harness fit and support- Metal side attachment points can be folded down to prevent them snagging accidentally when not in use- Elastic leg loop bands (replaceable and available as an accessory) allow the harness to maintain the right adjustment whether the user is walking or suspended
Easy to adjust:- Self-locking DOUBLEBACK buckles make adjusting the shoulder straps, waistbelt, and leg loops simple and convenient- Anti-slip devices installed on the DOUBLEBACK buckles help maintain the right adjustment throughout the workdayEasy to carry and organize equipment:- Metal ventral D ring is equipped with connection points to install a PODIUM or LITEPOD work seat- Ventral connection point features a textile loop that allows the user to install a lanyard with a RING OPEN attachment ring- Two side metal attachment points for connecting a positioning lanyard in double mode- Five pre-shaped equipment loops with protective sheath- Two slots for CARITOOL tool holders or the INTERFAST connection system
Specifications:

• Ventral attachment point: Attachment for a descender, a positioning lanyard in single mode, a work seat on the ventral D ring; attachment for a lanyard with a RING OPEN to the textile connection point
• Lateral attachment points: Attachment for a positioning lanyard for use in double mode
• Sternal attachment point: Attachment for a fall-arrest system
• Dorsal attachment point: Attachment for a fall-arrest system
• Rear attachment point on the waistbelt: Attachment for a restraint lanyard
• Certification(s): CE EN 361, EN 813, EN 358
• Material(s): Nylon, polyester, aluminum, steel.

Additional Information:

• Delivery Time: Depend on Availability

Fall-arrest and work positioning harness with attachment point for vertical progression on rail or cable-based fall protection system.The VOLT fall-arrest and work positioning harness is very quick to don, thanks to the FAST LT PLUS and FAST LT buckles that allow it to be donned with both feet on the ground. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow. Its LADDER CLIMB attachment point allows for ventral attachment of the fall-arrest trolley, providing optimal comfort during progression. It is certified to European and Russian standards.

Description:Quick and easy donning:- Waistbelt equipped with a FAST LT PLUS buckle for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves- FAST LT leg loop buckles allow the harness to be easily donned with both feet on the ground and retain their adjustment settings between donnings- DOUBLEBACK self-locking buckles on waistbelt and shoulder straps for precise adjustment- Leg loop foam position can be adjusted for ideal positioning
Comfortable throughout the workday:- Wide, semi-rigid waistbelt and leg loops for excellent support and lightweight, breathable construction to maximize air flow- Padded shoulder straps are widely spaced to reduce neck chafing and help distribute the load over the shoulders when the waistbelt is loaded- LADDER CLIMB ventral attachment point adapts to a variety of uses (progression, positioning, and occasional suspension), and allows the user to connect a lanyard, descender, or fall-arrest trolley; for vertical progression with a rail or cable-based fall protection system, the LADDER CLIMB attachment point allows for ventral attachment of the trolley, which distributes the load on the waistbelt and provides optimal comfort, and in the event of a fall, this attachment point automatically moves upward to a sternal position, allowing a vertical post-fall body position- Side slots allow a seat to be installed for greater comfort during prolonged suspension
Easy to use:- Side attachment points can be folded down to prevent accidental snagging when not in use- Stowing system for the MGO connectors on fall-arrest lanyards are located on each shoulder strap; in the event of a fall, the system releases the MGO connectors and allows the absorber to be deployed- Equipment loops, as well as slots for CARITOOL tool holder and TOOLBAG tool pouch make it easy to organize work tools
Specifications:

LADDER CLIMB ventral attachment point: Connection of a positioning lanyard in single mode use, a descender, or a fall-arrest trolley

Side attachment points: For attaching a positioning lanyard for use in double mode

Sternal attachment point: For attaching a fall-arrest system

Dorsal attachment point: For attaching a fall-arrest system

Rear waistbelt attachment point: For attaching a restraint lanyard

Certification(s): CE EN 361, CE EN 358, CE EN 813, EAC, JSFAD

Material(s): Nylon, polyester, aluminum, steel

ReferencesC072AA00C072AA01C072AA02Color(s)Black/YellowBlack/YellowBlack/YellowSize012Waist belt65-80 cm70-93 cm83-120 cmLeg loops44-59 cm47-62 cm50-65 cmStature160-180 cm165-185 cm175-200 cmWeight2100 g2150 g2230 g

Additional Information:

• Minimum Order Quantity: 1 Piece
• Delivery Time: Depend on Availability

Product Details:

Fall arrest (EN 361 CE)
Positioning (EN 358 CE) 2 fall arrest Widthring points (A): dorsal and chest
2 lateral positioning buckles
Padding weist and legs
Comfort foam in the neck area

Product Details:

Comfortable work seat designed for prolonged suspension
The PODIUM work seat allows work-at-height and rope access technicians to sit when suspended in their harness for long periods of work, providing additional comfort. It features three equipment loops and is easily adjustable, with DOUBLEBACK buckles. It can be connected to the harness with T-BARs, which can be attached directly to the shackles, or with connectors or accessory carabiners such as the MINO.

Description:

Comfort for prolonged periods of suspension:
- Wide seat provides excellent stability
- Rigid sides prevent the webbing straps from compressing thighs

Three ways to connect to a harness:
- Directly to the shackles with T-BARs
- Using accessory carabiners (MINO)
- Using connectors on the loops at the end of the webbing

Convenient and sustainable:
- The straps are easy to adjust with self-locking DOUBLEBACK buckles
- It has three pre-shaped equipment loops with a protective sheath that help balance the weight
- Each equipment loop can hold up to 25 kg
- Covering can be replaced and metal plate can be reused (covering available as an accessory)

Specifications:

• Weight: 1150 g
• Maximum load: 50 kg
• Material(s): Polyester, aluminum
• Dimensions: 55x16x16 cm

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Ultra-comfortable sit harness for rope access.
The ASTRO SIT sit harness is specifically designed for workers at height and rope access technicians looking for a lightweight and modular solution. It can be made into a full-body fall-arrest harness by connecting a TOP CROLL chest harness, for ascending a rope. The 3D foam padding and semi-rigid waistbelt and leg loop construction provide comfort throughout the workday. The textile bridge construction provides ease of movement and comfort when walking. The gated ventral attachment point allows the user to efficiently install the necessary equipment for progression. The waistbelt features metal side attachment points, equipment loops, and tool holder slots, allowing the user to organize and carry all the necessary equipment for a day of work. DOUBLEBACK self-locking buckles and FAST opening buckles make donning and adjusting the harness simple and convenient, even while wearing gloves.

Description:

Ultra-comfortable construction:
- All contact zones, including the waistbelt and leg loops, use 3D foam padding and are lined with breathable material, providing more comfort while suspended and throughout the workday
- Textile bridge provides ease of movement at the workstation, as well as improved comfort when walking
- Semi-rigid waistbelt and leg loops provide optimal harness fit and support
- Metal side attachment points can be folded down to prevent them snagging accidentally when not in use
- Elastic leg loop bands (available individually) allow the harness to maintain the right adjustment whether the user is walking or suspended

Efficiently integrate equipment with gated ventral point:
- Connect the PROGRESS ADJUST or JANE lanyard directly to the pin of the attachment point without a connector
- The TOP CROLL chest harness connects directly to the ventral point for greater efficiency and freedom of movement on rope ascents
- Connect a PODIUM or LITEPOD work seat to the pin of the attachment point so the load is supported directly by the descender, while providing mobility at the ventral attachment point

Convenient adjustment system:
- Waistbelt is equipped with DOUBLEBACK self-locking buckles and anti-slip devices can be inserted (included, but not installed)
- DOUBLEBACK self-locking buckles are made of anodized aluminum and remain easy to adjust throughout the lifespan of the harness
- Leg loops are equipped with FAST opening buckles that fasten and unfasten quickly and easily, even while wearing gloves, without needing to readjust

Easy to carry and organize equipment:
- Waistbelt is equipped with two foldable, side metal attachment points for connecting a positioning lanyard in double mode
- Seven pre-shaped equipment loops with protective sheath, two slots for CARITOOL tool holders and INTERFAST connection system, and two loops for TOOLBAG tool pouches

Specifications:

• Ventral attachment point: Attachment for a descender, a progression or positioning lanyard in single mode, or a work seat
• Lateral attachment points: Attachment for a positioning lanyard for use in double mode
• Sternal attachment point: Attachment for a fall-arrest system
• Dorsal attachment point: Attachment for a fall-arrest system
• Rear attachment point on the waistbelt: Attachment for a restraint lanyard
• Certification(s): CE EN 813, EN 358
• Material(s): Nylon, polyester, aluminum, steel

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Comfortable and versatile sit harness for work at height
The AVAO SIT sit harness is specifically designed for workers at height looking for a lightweight and modular solution. It can be turned into a full-body fall-arrest harness by connecting a TOP or TOP CROLL chest harness. Its design is specific to work positioning and rope descent. Contoured foam on the semi-rigid waistbelt and leg loops provide comfort during use. The waistbelt features metal side attachment points, equipment loops, and tool holder slots, allowing the user to organize all the necessary equipment for a day of work. Adjustment is quick and easy with self-locking DOUBLEBACK buckles.

Description:

Comfortable construction:
- All contact zones, including the waistbelt and leg loops, use contoured foam and are lined with breathable material, making it more comfortable to work and move around
- Semi-rigid waistbelt and leg loops provide optimal harness fit and support
- Metal side attachment points can be folded down to prevent them snagging accidentally when not in use
- Elastic leg loop bands (replaceable and available as an accessory) allow the harness to maintain the right adjustment whether the user is walking or suspended

Sit harness that can be turned into a full-body fall-arrest harness by connecting a TOP or TOP CROLL chest harness with a RING OPEN or a quick link

Convenient adjustment system:
- Self-locking DOUBLEBACK buckles make adjusting the waistbelt and leg loops simple and convenient
- Anti-slip devices installed on the DOUBLEBACK buckles help maintain the right adjustment throughout the workday

Easy to carry and organize equipment:
- Metal ventral D ring is equipped with connection points to install a PODIUM or LITEPOD work seat
- Ventral connection point features a textile loop that allows the user to install a lanyard with a RING OPEN attachment ring
- Two side metal attachment points for connecting a positioning lanyard in double mode
- Five pre-shaped equipment loops with protective sheath
- Two slots for CARITOOL tool holders or the INTERFAST connection system

Specifications:

• Ventral attachment point: Attachment for a descender, a positioning lanyard in single mode, a work seat on the ventral D ring; attachment for a lanyard with a RING OPEN to the textile connection point
• Lateral attachment points: Attachment for a positioning lanyard for use in double mode
• Rear attachment point on the waistbelt: Attachment for a restraint lanyard
• Certification(s): CE EN 813, CE EN 358, conforme à la réglementation japonaise de protection contre les chutes
• Material(s): Nylon, polyester, aluminum, steel

 

Additional Information:

• Delivery Time: Depend on Availability

Product Details:

Fall arrest (EN 361 CE)
Positioning (EN 358 CE) 2 fall arrest Widthring points (A): dorsal and chest
2 lateral folding positioning buckles
Quick-fit buckles on waistband, leg supports and chest
Padding weist and legs
Comfort foam in the neck area
2 material holding rings

Additional Information:

• Item Code: Rota
• Delivery Time: 2 weeks

Product Details:

Fall arrest (EN 361 CE)
Positioning (EN 358 CE) 2 fall arrest Widthring points (A): dorsal and chest
2 lateral positioning buckles

Product Details:

Fall arrest (EN 361 CE) 2 fall arrest Widthring points (A): dorsal and chest
Adjustable buckes in leg support

Product Details:

It is imperattive to use with a fall protection harness, and it´s often combined with support devices for climb / descent.

• Padded buttocks
• Adjustable tape length
• Dimensions: 67 x 24 cm
• 3 material holding rings
• Material: wood
• Dimensions: 67 x 24 cm
• Padded buttocks
• 3 material holding rings
• Adjustable tape length