Industrial Lifting Equipment

Product Details:

Retractable fall arrester for terrace use: the blocfor™ 6 ESD 150 kg (Extremity System Dissipator). This new version of retractable fall arrester is equipped with an energy absorber more efficient for 150 kg.
High Capacity Range 150 kg. Complies with CNB/P/11.062
Complies with EN 360 and CNB/P/11.060 standards for use on edges with a minimal 0.5 mm curve radius Fall arrest device with ESD technology suitable for use on terrace roofs Can be used vertically or with a standard deviation of 20° in relation to vertical Can be used horizontally without the use of a lanyard between the end of the strap and harness Flexible unwinding system which doesn’t jerk during operator movement Responsive system which locks automatically in the event of a fall, reducing the total drop height Includes Energy System Dissipater (ESD) technology which enables the device to arrest a fall even when the webbing is fully unwound Integrated fall indicator Length 5 or 6 metres, webbing version Lightweight ABS fibre reinforced polyamide housing Standard M47 swivel connector at end of shock absorber 

Additional Information:

• Item Code: 070662

Product Details:

blocmat™ TSD, Self-Retracting Load Fall Arrest, is equipped with the new TSD system (Top System Dissipator) The TSD system guarantees a fall load of less than 650daN even if the load drops when the cable is fully unwound.The main advantages of using the blocmat ™TSD, self-retracting load fall arrester are:Integration of the TSD system at the top of the device. This eliminates the risk of a violent shock if the load drops when the cable is fully unwound.A very good grip for transport and installation.Simplified maintenance due to its optimized design

Product Details:

blocmat™ TSD, Self-Retracting Load Fall Arrest, is equipped with the new TSD system (Top System Dissipator) The TSD system guarantees a fall load of less than 650daN even if the load drops when the cable is fully unwound.
The main advantages of using the blocmat ™TSD, self-retracting load fall arrester are:Integration of the TSD system at the top of the device. This eliminates the risk of a violent shock if the load drops when the cable is fully unwound.A very good grip for transport and installation.Simplified maintenance due to its optimized design

Product Details:

The tirfor® T500 hoist is a manual lifting and pulling device.

It is a versatile and portable multi-purpose device.

It can be used for lifting and pulling, but also for lowering, tensioning and securing loads in all directions.

One-man operation by using the telescopic control lever supplied as standard.

Spare shear pins for overload protection are supplied as standard.

Proven quality for decades, brand name and market leader – often copied never equaled

The tirfor® T series for standard applications

 

 Lightweight and easily portable for use anywhere

 Delivering safe and assured operation in any direction, either in a straight line or using diverter pulleys over an unlimited length

 Low-wear clamping jaws during demanding applications increasing the life of the wire rope

 Overload protection for safe and secure operation

 Fast and easy to install and use

 Working load can be increased by using sheave blocks

 Positioning loads with millimetre accuracy

 Secure release system

 Load capacity from 800 - 3200 kg

 Full range of accessories are available – sheave blocks, diverter pulleys, ground anchors and reelers

Product Details:

The tirfor® T500 hoist is a manual lifting and pulling device.It is a versatile and portable multi-purpose device.It can be used for lifting and pulling, but also for lowering, tensioning and securing loads in all directions.One-man operation by using the telescopic control lever supplied as standard.Spare shear pins for overload protection are supplied as standard.Proven quality for decades, brand name and market leader – often copied never equaled
The tirfor® T series for standard applications
???    Lightweight and easily portable for use anywhere???    Delivering safe and assured operation in any direction, either in a straight line or using diverter pulleys over an unlimited length???    Low-wear clamping jaws during demanding applications increasing the life of the wire rope???    Overload protection for safe and secure operation???    Fast and easy to install and use???    Working load can be increased by using sheave blocks???    Positioning loads with millimetre accuracy???    Secure release system???    Load capacity from 800 - 3200 kg???    Full range of accessories are available – sheave blocks, diverter pulleys, ground anchors and reelers

Additional Information:

• Item Code: T500

Product Details:

TIRSAFE is a temporary lifeline, easy and quick to install when there are two anchoring points offering sufficient support. It allows total freedom of horizontal movement. The TIRSAFE temporary lifeline includes :

- 1 anchoring point with TIRSAFE energy shock-absorber which ensures triple function of pre-tension indicator, energy shockabsorber indicator and fall indicator,
- 1 TIRFOR T3 cable winch,
- 1 8.3 mm diameter, 20 metre long cable as standard,
- 2 x 2 metre slings.

The TIRSAFE temporary lifeline guarantee the safety of 3 people. Standards EN 795 B and EN 795 C.

Additional Information:

• Item Code: 276149

Product Details:

The tirfor® T500 hoist is a manual lifting and pulling device.It is a versatile and portable multi-purpose device.It can be used for lifting and pulling, but also for lowering, tensioning and securing loads in all directions.One-man operation by using the telescopic control lever supplied as standard.Spare shear pins for overload protection are supplied as standard.Proven quality for decades, brand name and market leader – often copied never equaled
The tirfor® T series for standard applications
???    Lightweight and easily portable for use anywhere???    Delivering safe and assured operation in any direction, either in a straight line or using diverter pulleys over an unlimited length???    Low-wear clamping jaws during demanding applications increasing the life of the wire rope???    Overload protection for safe and secure operation???    Fast and easy to install and use???    Working load can be increased by using sheave blocks???    Positioning loads with millimetre accuracy???    Secure release system???    Load capacity from 800 - 3200 kg???    Full range of accessories are available – sheave blocks, diverter pulleys, ground anchors and reelers

Product Details:

Pirce range from Rs.831600 - Rs.1085670
TR Series

The minifor hoist is very compact, light-weight and easy to handle. Unlimited wire rope length and therefore unlimited lifting height. Available in various models. This hoist is not only suitable for lifting loads, but also for pulling loads in any direction.

Operated by a control pendant (2.5m cable, Up/Down/Emergency Stop), which is supplied as standard. Power supply cable length 1 metre, with CEE Form connector.

The minifor can be equipped with a robust Up/Down/Emergency Stop push button remote control with a default range 70 m, 433 MHz.

Integrated drum reelers are available for wire rope lengths 20m, 27 and 40m dependent on capacity of the minifor

minifor offers a compact portable motorized solution for lifting, pulling as well as positioning loads

• Unlimited wire rope length and therefore unlimited lifting height
• Compact, manageable and low self-weight.
• Unique lifting capacity/self-weight ratio.
• Handle for easy carrying
• Power supply 230 VAC or 400 VAC. Can be used in any working environment.
• Wire rope or kernmantle rope version.
• Quick and easy installation and includes a swivel eye hook
• In conformity with Machinery Directive 2006/42/CE and the European EN 292 standard.
• WLL can be increased to a maximum of 950kg using a sheaving kit
• Unique lifting capacity/self-weight ratio
• Unlimited wire rope length
• Reliable and easy to use
• Working load can be increased by using optional sheaving kit
• Up and down limit switches
• Optional reelers
• Optional remote control
• Strong, robust and versatile (IP55)