Industrial Ropes

Product Details:

 

Low stretch kernmantel rope with good handling for work at height

The AXIS 11 mm low stretch kernmantel rope is designed for work at height. The standard diameter ensures a good grip for easier handling. The EverFlex technology guarantees great flexibility and consistent performance over time. Rope available in six colors and four lengths.

Description

• Standard diameter ensures a good grip for easier handling
• Consistent performance over time:
  - construction with nylon core and polyester sheath, with specific weave
  - EverFlex technology ensures great flexibility over time and under any conditions (water, dust, mud...), allowing it to maintain excellent handling and optimal performance with devices
• Available in six colors: white, yellow, black, blue, red and orange
• Standard lengths: 50, 100, 200 and 500 m
• Customization on request:
  - option of ordering a rope of a specified length (up to 700 m)
  - addition of sewn terminations manufactured on one or both ends, providing a ready-to-use rope. These terminations have a protective sheath that keeps the connector in position and facilitates handling. They are also stronger than a figure-eight knot

Specifications

• Diameter: 11 mm
• Material(s): polyester, nylon
• Certification(s): CE EN 1891 type A, EAC, NFPA 1983 Technical Use
• Weight per meter: 82 g
• Strength tied with figure-eight knot: 19 kN
• Strength with sewn termination: 22 kN
• Impact force (factor 0,3): 5,2 kN
• Number of factor 1 falls: 12
• Construction: 32 carrier
• Percentage of sheath: 41 %
• Static elongation: 3 %

References

Additional Information:

• Item Code: R074AA

Product Details:

 

The PARALLEL 10.5 mm low stretch kernmantel rope is designed for rope access. The small diameter ensures very good performance in terms of flexibility and weight. It has low stretch when put under tension, increasing efficiency at the start of a rope ascent. 

Description

• Small diameter ensures very good performance in terms of flexibility and weight
• Low stretch when loaded, increasing efficiency at the start of a rope ascent
• Consistent performance over time:
  - construction with nylon core and polyester sheath, with specific weave
  - EverFlex technology ensures great flexibility over time and under any conditions (water, dust, mud...), allowing it to maintain excellent handling and optimal performance with devices
• Standard lengths: 50, 100, 200 and 500 m
• Customization on request:
  - option of ordering a rope of a specified length (up to 700 m)
  - addition of sewn terminations manufactured on one or both ends, providing a ready-to-use rope. These terminations have a protective sheath that keeps the connector in position and facilitates handling. They are also stronger than a figure-eight knot

Specifications

• Diameter: 10,5 mm
• Material(s): polyester, nylon
• Certification(s): CE EN 1891 type A, EAC, NFPA 1983 Technical Use
• Weight per meter: 75 g
• Strength tied with figure-eight knot: 15 kN
• Strength with sewn termination: 22 kN
• Impact force (factor 0,3): 5,2 kN
• Number of factor 1 falls: 10
• Construction: 32 carrier
• Percentage of sheath: 45 %
• Static elongation: 3,4 %

 

 

Additional Information:

• Item Code: R077AA

Product Details:

12 strands UHMWPE mooring/anchoring rope, is the right rope for the right application. Mooring has significant operational demands, our UHMWPE mooring rope has significant strength for mooring requirements with light weight, which is easier for handling.
For all applications which require high resistance, low weight and minimum water absorption. Ideal for small diameter and low weight halyards, sheets and after guys, strops, control lines and tackles. With Superound78 it is possible to form eyes (adequately spliced) for block beckets and fittings of all kinds. High resistance to abrasion and UV rays. Excellent flex/fold characteristics on small pulleys. Thanks to the elevated breaking load, small diameters can be used, thus reducing weight on board. Particular attention must be paid to make sure that the workloads match those of the rope and that dimensions are correct and suitable for the equipment being used.
Breaking Strength :- 1600 Kg

Additional Information:

• Production Capacity: 1600kg
• Delivery Time: 1 week

Product Details:

9.8 mm diameter lightweight single rope for gym or rock climbing

The CONTACT 9.8 mm single rope is designed for gym and rock climbing. It strikes an excellent balance between low weight and durability, for greater versatility. Excellent grip and great handling make for easier manipulation and use of belay devices. The thickness of its sheath also contributes to its durability.

Description

• User comfort:
  - flexible rope makes it easier to give slack with belay devices
  - EverFlex treatment: specific thermal treatment stabilizes core strands and improves consistency. It provides excellent grip and consistent handling over time
  - ClimbReady Coil: special coil makes the rope ready to use. It helps the user avoid initial uncoiling mistakes, and increases longevity
• Grip makes for easier handling:
  - excellent balance of weight, diameter, and grip
  - 40-carrier grip for better control
  - Middle Mark: indicates the middle of the rope, to facilitate maneuvers
• Durability:
  - thick sheath provides excellent abrasion resistance
  - UltraSonic Finish: the core and sheath are bonded together at the rope ends by an ultrasonic process. It provides greater durability and prevents frayed ends

Specifications

• Diameter: 9,8 mm
• Rope type: (CE EN 892, UIAA): single rope
• Weight per meter: 60 g
• Percentage of sheath: 41 %
• Number of factor 1,77 falls: 7
• Static elongation: 9,0 %
• Dynamic elongation: 35 %
• Impact force: 8,4 kN
• Construction: 40 carrier
• Material(s): nylon

References

 

Additional Information:

• Item Code: R33AC

Product Details:

12 strands UHMWPE mooring/anchoring rope, is the right rope for the right application. Mooring has significant operational demands, our UHMWPE mooring rope has significant strength for mooring requirements with light weight, which is easier for handling.
For all applications which require high resistance, low weight and minimum water absorption. Ideal for small diameter and low weight halyards, sheets and after guys, strops, control lines and tackles. With Superound78 it is possible to form eyes (adequately spliced) for block beckets and fittings of all kinds. High resistance to abrasion and UV rays. Excellent flex/fold characteristics on small pulleys. Thanks to the elevated breaking load, small diameters can be used, thus reducing weight on board. Particular attention must be paid to make sure that the workloads match those of the rope and that dimensions are correct and suitable for the equipment being used.
Breaking Strength :- 7150 Kg

Additional Information:

• Production Capacity: 7150

Product Details:

12 strands UHMWPE mooring/anchoring rope, is the right rope for the right application. Mooring has significant operational demands, our UHMWPE mooring rope has significant strength for mooring requirements with light weight, which is easier for handling.
For all applications which require high resistance, low weight and minimum water absorption. Ideal for small diameter and low weight halyards, sheets and after guys, strops, control lines and tackles. With Superound78 it is possible to form eyes (adequately spliced) for block beckets and fittings of all kinds. High resistance to abrasion and UV rays. Excellent flex/fold characteristics on small pulleys. Thanks to the elevated breaking load, small diameters can be used, thus reducing weight on board. Particular attention must be paid to make sure that the workloads match those of the rope and that dimensions are correct and suitable for the equipment being used.
Breaking Strength :- 4800 Kg

Additional Information:

• Production Capacity: 4600
• Delivery Time: 1 week